Хотите узнать больше ?
Хотите узнать больше ?
By bringing high performance AST solutions into your lab, we make you optimize animal health management and accompany you to use the most appropriate antimicrobial therapy.
Used for microbial identification, VITEK® 2 systems are also a reference for antibiotic susceptibility testing and resistance detection.
Based on broth microdilution, these automated systems help your veterinary lab to perform same day susceptibility tests, increasing your lab productivity.
Our systems come with a wide offer of the most relevant susceptibility tests for veterinary diagnostics
The VITEK® 2 range includes different automated systems, all designed to meet your AST needs:
To find the most adapted system and accessories for your veterinary lab, use the contact form for more information or visit our e-catalogue for product references.
Dimensions
Height 60 cm (23.6 in.)
Width 72 cm (28.3 in.)
Depth 68 cm (26.8 in.)
Mass
Approximately 75 kg (165 Lb)
Electrical Characteristics
Input voltage:100/120/220/240 VAC at 50/60 Hz
Maximum input current: 5 amps @ 120 VAC or 2.5 amps @ 240 VAC
Nominal input current: 2.5 amps @ 120 VAC or 1.25 amps @ 240 VA
Power : 300 watts nominal, 600 watts peak
Heat: 1025 BTU/HR (nominal)
Power cord: Detachable 3-wire with ground, per IEC 320
General Characteristics
Cassette: Capacity, cards: 10 cards per cassette
Vacuum (Filler): Minimum level: 0.89 PSIA ±0.06 PSIA
Sealer: Mechanical: stub length 1.25 ± .25 mm
Incubator: Temperature: 35.5 °C ± 1 °C average
Capacity: 30 or 60 cards per Incubator (depending on configuration)
Weight:
Electrical Power Requirements:
Heat Dissipated:
Environmental Requirements:
Operating Ambient Temperature Range: 20°C to 30°C (68°F-86°F)
Operating Humidity Range: 20% to 80% relative humidity, non-condensing
Altitude:
Up to 2000 meters